Get Skinii Instructions

Easy, quick, simple, effective, and efficient

Step 1:

Center UTV to toy hauler or trailer

A blue all-terrain vehicle parked on a forest path.

Step 2:

Place the Skinii Glide Base with the Skinii Ramp behind the front driver side tire

Step 3:

Gently back onto the Skinii Glide and center the tire on the Glide

Step 4:

Attach loop straps around front end A-arms – run one end of the loop strap through the other end and synch them tight. As you Skinii the front end the loop strap will get tighter.

Close-up of a rugged off-road tire on a vehicle.

Step 5:

Attach the ratchet device to the loop straps
(i.e., Ratchet strap, Come Along, or Drill Winch)

Red tow strap attached to a vehicle's tow hook.

Step 6:

Ratchet the A-arms together to desired width
(Refer to your owner’s manual for how much you can pull the A-arms together without causing any damage)

Ratcheting Alternatives:

  1. Ratchet Strap - HEAVY DUTY 2-inch webbing width & 10-foot length with a 5000LB breaking strength & 1666LB working load limit
  2. Come Along - 2-ton capacity
  3. Portable Drill Winch - 750 lb. pulling capacity OR more
  4. Loop Straps - HEAVY DUTY tie down loop straps 1.5” x 18” x 10,000 LBS for ATV, UTV Trailer
Blue device attached under an aircraft with red straps.
Clamps securing a yellow strap attached to a vehicle frame.
Close-up of a motorcycle's rear suspension and red tow hook attachment.

  • Step 7:

     Pull forward and drive off the Skinii Glide

  • Step 8:

     Remove Skinii Glide from under UTV

  • Step 9:

     Ready to load